5/25/19

Good and bad

Another day at the airport.

Got my registration marks painted under the wing, this would have been so much easier to do before the wings was mounted to the airplane!

Getting the washers in place when attaching the elevator controls was difficult, should have done this before mounting the vertical stabilizer. Then the molex connector on the trim wires broke, after reading about others problems with these connectors it was probably for the best that I had to hard wire them instead.



I finished off with testing my nav and strobe lights. All nav lights worked, the strobe worked in the tail and on the left wingtip but not on the right wingtip, to be investigated.

No comments:

Post a Comment