 |
| Where does this go? |
Showing posts with label Wing wire. Show all posts
Showing posts with label Wing wire. Show all posts
2/26/17
8/12/16
Section 19 done
Chapter 19, wing system routing was almost completed long ago.
After installing the tanks, I went thru the manual and found that chapter 19 was not marked as completed. I quickly found that what was left to do was to connect the fuel senders to the wire harness.
After installing the tanks, I went thru the manual and found that chapter 19 was not marked as completed. I quickly found that what was left to do was to connect the fuel senders to the wire harness.
4/27/16
More wires
I put in a coax cable and two AWG24 wires into the right wing, all the way to the tip. For an eventual VOR/Loc antenna and 5v for cameras or other things.
4/25/16
Work done
Today I got wire for the heated pitot, Nav-antenna and backup wire for things like power to a GoPro or similar. I also got a replacement AN4-32A bolt, for the one I bent when trying to install the right wing aileron actuation.
Tonight I installed the above actuation and fixed the sound in the shop (Windows 10 driver issue)
Tonight I installed the above actuation and fixed the sound in the shop (Windows 10 driver issue)
Cleaning up and purchases
Cleaned up the tools and work area last night. Today I got some cables so I should be able to close the wings soon.
8/23/15
The wing system routing chapter is done
Well, I skipped the pitot installation as I will mount a mast instead. I might also install wires for a wing tip antenna.
8/19/15
8/17/15
8/15/15
Subscribe to:
Posts (Atom)