Tail cover in place again

The tail cover plate with it´s new EXPERIMENTAL sign is in place again. More import is that behind the cover, there is a fully installed pitch servo.

None of the servos have their wiring done. I have not decided on how to do the can-bus connection. One alternative I am thinking about is to have one end of the chain start at the pitch servo i the tail, going to the Magnetometer in the left wing, from there to all the LRUs in the panel and then ending at the roll servo in the right wing. Another is to keep one end being at the Magnetometer, going to the panel LRUs, from there to the roll servo and from there to the pitch servo.