10/1/18

No smoke :)

I finished the GTN625 connector. Assembled the 625 back plate and connected the power and ground wires. I put in a 3 amp fuse and temporary wired my small 12v battery to the connectors on the FW side.

With the camera set up I flipped the master switch and it turned on. Of course complaining about not having the card with map data and so on. But no smoke!

Disconnected everything and went inside just to discover that today was the day that the cameras SD-card decided to die :( So I missed recording this event, one camera is simply not enough for important events!

2 comments: