Dimpling of the big lower fuselage skin

Started dimpling the large lower fuselage skin today. Could not reach the hole in the middle of the skin with the C-frame. People say that it can be done but I will not bother figuring out how, I will use another method to dimple it tomorrow.

Steve M from VAF sent me the fuel drain fairing design he has made and I made a test print in PLA on my 3D printer. I will do some small adjustments and then print it in ABS. Good for an additional 5 knots ;)

My shop network problem turned out to be that the very old router I had there is ready for the bin. Now my NAS is connected directly but I have lost wifi and network connection on the shops laptop until I get a replacement.